Se você não encontrar a peça que precisa, entre em contato conosco para confirmação, pois nem todas as peças disponíveis estão listadas.
| C | Número da peça | Descrição |
| Sandvik CS420 | 442.6127-00 | Gear compl. |
| Sandvik CS420 | 442.6127-02 | Pinhão |
| Sandvik CS420 | 442.6131-01 | Bottom shell bushing |
| Sandvik CS420 | 442.6132-01 | Dust collar |
| Sandvik CS420 | 442.6133-01 | Pinion shaft |
| Sandvik CS420 | 442.6134-01 | Pinion shaft housing |
| Sandvik CS420 | 442.6138-01 | Main shaft step |
| Sandvik CS420 | 442.6139-01 | Piston wearing plate |
| Sandvik CS420 | 442.6140-01 | Main shaft sleeve |
| Sandvik CS420 | 442.6141-01 | Retainer |
| Sandvik CS420 | 442.6174-01 | Liner-pinion shaft arm |
| Sandvik CS420 | 442.6174-01 | Pin shaft arm liner |
| Sandvik CS420 | 442.6193-01 | Inner head nut |
| Sandvik CS420 | 442.6194-00 | Head nut with burn ring |
| Sandvik CS420 | 442.6473-01 | Spider bushing |
| Sandvik CS420 | 442.6627-00 | Pinion shaft housing ass |
| Sandvik CS420 | 442.6777-01 | Main shaft |
| Sandvik CS420 | 442.6789-01 | Mantle B M1 |
| Sandvik CS420 | 442.6816-00 | Main shaft ass excl. mantle |
| Sandvik CS420 | 442.6908-01 | Bushing R 2”x1 |
| Sandvik CS420 | 442.6908-01 | Bushing 1914-04 |
| Sandvik CS420 | 442.6977-00 | Concaves |
| Sandvik CS420 | 442.6978-00 | Concaves |
| Sandvik CS420 | 442.7379-00 | Concave-top tier |
| Sandvik CS420 | 442.7802-00 | Gear and pinion set |
| Sandvik CS420 | 442.7802-02 | Pinhão |
| Sandvik CS420 | 442.7889-01 | Hydroset cylinder |
| Sandvik CS420 | 442.7892-01 | Hydroset cylinder bushing |
| Sandvik CS420 | 442.7893-01 | Piston wearing plate |
| Sandvik CS420 | 442.7895-01 | Mainshaft step |
| Sandvik CS420 | 442.7908-00 | Bottom Shell |
| Sandvik CS420 | 442.7913-01 | Mainshaft sleeve |
| Sandvik CS420 | 442.7915-01 | Liner –-Pinionshaft arm |
| Sandvik CS420 | 442.7915-01 | Liner – Pinionshaft arm |
| Sandvik CS420 | 442.7915-01 | Pin shaft arm liner |
| Sandvik CS420 | 442.7918-01 | Inner head nut |
| Sandvik CS420 | 442.7926-01 | Hub |
| Sandvik CS420 | 442.7929-01 | Dust collar |
| Sandvik CS420 | 442.7949-01 | Pinion Shaft Housing |
| Sandvik CS420 | 442.8020-01 | Retaining ring |
| Sandvik CS420 | 442.8363-01 | Spider bushing |
| Sandvik CS420 | 442.8366-01 | Top shell |
| Sandvik CS420 | 442.8374-00 | Top shell EC2 mont. excl. concaves |
| Sandvik CS420 | 442.8446-01 | TOP SHELL EC2 S3000, N11851726 |
| Sandvik CS420 | 442.8449-01 | Excêntrico |
| Sandvik CS420 | 442.8464-001 | Lower concave ring EC |
| Sandvik CS420 | 442.8470-01 | Mantle A M1 |
| Sandvik CS420 | 442.8471-01 | Mantle B M1 |
| Sandvik CS420 | 442.8477-00 | Lower concave ring EC |
| Sandvik CS420 | 442.8478-00 | Lower concave ring C |
| Sandvik CS420 | 442.8484-00 | Concave upper |
| Sandvik CS420 | 442.8485-00 | Concave upper C |
| Sandvik CS420 | 442.8486-01 | Eccentric bushing,16/20/25/30 |
| Sandvik CS420 | 442.8520-00 | Spider cap |
| Sandvik CS420 | 442.8522-00 | Lower concave ring C |
| Sandvik CS420 | 442.8550-00 | Concave-top tier |
| Sandvik CS420 | 442.8870-00 | Liners bottom shell |
| Sandvik CS420 | 442.8870-00 | Wearing plates complete set |
| Sandvik CS420 | 442.8882-01 | Head center |
| Sandvik CS420 | 442.9035-01 | Liner |
| Sandvik CS420 | 442.9288-01 | Mantle A M1 |
| Sandvik CS420 | 442.9667-00 | Hydroset cylinder cover |
| Sandvik CS420 | 442.9686-01 | Eccentric bushing |
| Sandvik CS420 | 442.9871-00 | Bottom shell |
| Sandvik CS420 | 442.9872-01 | Hydroset cylinder |
| Sandvik CS420 | 442.9873-01 | Hydroset cylinder bushing |
| Sandvik CS420 | 442.9936-01 | Pinion shaft |
| Sandvik CS420 | 442.9962-00 | Pinion shaft housing assembled |
| Sandvik CS420 | 452.0632 | Head center |
| Sandvik CS420 | 452.0651-001 | Main shaft |
| Sandvik CS420 | 452.1464-901 | Concave ring MC |
| Sandvik CS420 | 452.1465-901 | Concave MC |
| Sandvik CS420 | 452.4190-001 | Bottom Shell Bushing |
| Sandvik CS420 | 452.4516-001 | Eccentric bushing 16+20+25+30 |
| Sandvik CS420 | 452.6109-001 | Topshell |
| Sandvik CS420 | 452.6113-001 | Arm shield |
| Sandvik CS420 | 452.6117-901 | Mainshaft with headcenter |
| Sandvik CS420 | 452.6119-001 | Main shaft |
| Sandvik CS420 | 452.6121-001 | Head center |
| Sandvik CS420 | 452.6149-901 | Mainshaft assembly excl. mantle |
| Sandvik CS420 | 452.6185-901 | Topshell assembly excl. crushing chamber |
| Sandvik CS420 | 452.6913-001 | Top shell |
| Sandvik CS420 | 452.7002-901 | Lower concave,C |
| Sandvik CS420 | 452.9012 | Mantle,A |
| Sandvik CS420 | 452.9013 | Mantle,B |
| Sandvik CS420 | 452.9015 | Mantle,EC |
| Sandvik CS420 | 452.9016 | Mantle,C |
| Sandvik CS420 | 452.9019 | Upper concave |
| Sandvik CS420 | 452.9020 | Upper concave |
| Sandvik CS420 | 868.0805-00 | Consequência |
| Sandvik CS420 | 869.0189-00 | Bushing MGT No. 100 Di = 80 |
| Sandvik CS420 | 869.0221-00 | Bushing MGT NR 100 Di=65 |
| Sandvik CS420 | 869.0221-00 | Di = 65,Bushing MGT No. 100 |
| Sandvik CS420 | 869.0327-00 | Bushing QD J80mm Di=80 |
| Sandvik CS420 | 869.0328-00 | Bushing QD F65 Di=65 |
| Sandvik CS420 | 869.0333-00 | M3-78 Di = 3⅞,Bushing QD M3 |
| Sandvik CS420 | 869.0338-00 | M3-38 Di = 3⅜,Bushing QD M3 |
| Sandvik CS420 | 869.0339-00 | M3-58 Di = 3⅝,Bushing QD M3 |
| Sandvik CS420 | 900.0134-00 | Bushing 3/8"×1/4X" |
| Sandvik CS420 | 900.0810-00 | Bushing RED 3/4”R1/2 |
| Sandvik CS420 | 900.1030-00 | Bushing RI-08-04 1/2"-1/4" |
| Sandvik CS420 | BG00133846 | Mantle,FlexiFeed B |
| Sandvik CS420 | BG00134054 | Mantle,FlexiFeed B |
| Sandvik CS420 | BG00134055 | Mantle,FlexiFeed B |
| Sandvik CS420 | BG00174592 | Lower concave,MC |
| Sandvik CS420 | BG00174593 | Lower concave,MC |
| Sandvik CS420 | BG00174594 | Lower concave,MC |
| Sandvik CS420 | BG00174595 | Lower concave,MC |
| Sandvik CS420 | BG00174596 | Lower concave,MC |
| Sandvik CS420 | BG00174597 | Lower concave,MC |
| Sandvik CS420 | BG00202524 | Mantle,FlexiFeed B |
| Sandvik CS420 | BG00358975 | Lower concave,MC |
| Sandvik CS420 | BG00395493 | Top shell assy exluding concave ring |
| Sandvik CS420 | BG00579404 | Pinion Shaft Housing Assembly |
| Sandvik CS430 | Número da peça | Descrição |
| Sandvik CS430 | 442.6473-01 | Spider bushing |
| Sandvik CS430 | 442.6908-01 | Bushing 1914-04 |
| Sandvik CS430 | 442.7802-00 | Gear and pinion set |
| Sandvik CS430 | 442.7802-02 | Pinhão |
| Sandvik CS430 | 442.7889-01 | Hydroset cylinder |
| Sandvik CS430 | 442.7892-01 | Hydroset cylinder bushing |
| Sandvik CS430 | 442.7893-01 | Piston wearing plate |
| Sandvik CS430 | 442.7895-01 | Mainshaft step |
| Sandvik CS430 | 442.7908-00 | Bottom Shell |
| Sandvik CS430 | 442.7913-01 | Mainshaft sleeve |
| Sandvik CS430 | 442.7915-01 | Liner –-Pinionshaft arm |
| Sandvik CS430 | 442.7918-01 | Inner head nut |
| Sandvik CS430 | 442.7926-01 | Hub |
| Sandvik CS430 | 442.7929-01 | Dust collar |
| Sandvik CS430 | 442.7949-01 | Pinion Shaft Housing |
| Sandvik CS430 | 442.8020-01 | Retaining ring |
| Sandvik CS430 | 442.8098-00 | First lower concave, C |
| Sandvik CS430 | 442.8098-90 | First lower concave, C |
| Sandvik CS430 | 442.8098-91 | First lower concave, C |
| Sandvik CS430 | 442.8114-00 | First lower concave, EC |
| Sandvik CS430 | 442.8114-90 | First lower concave, EC |
| Sandvik CS430 | 442.8114-91 | First lower concave, EC |
| Sandvik CS430 | 442.8446-01 | TOP SHELL EC2 S3000, N11851726 |
| Sandvik CS430 | 442.8449-01 | Excêntrico |
| Sandvik CS430 | 442.8470-01 | Mantle A M1 |
| Sandvik CS430 | 442.8471-01 | Mantle B M1 |
| Sandvik CS430 | 442.8477-00 | Lower concave ring EC |
| Sandvik CS430 | 442.8478-00 | Lower concave ring C |
| Sandvik CS430 | 442.8484-00 | Concave upper |
| Sandvik CS430 | 442.8485-00 | Concave upper C |
| Sandvik CS430 | 442.8486-01 | Eccentric bushing,16/20/25/30 |
| Sandvik CS430 | 442.8520-00 | Spider cap |
| Sandvik CS430 | 442.8870-00 | Liners bottom shell |
| Sandvik CS430 | 442.9035-01 | Liner |
| Sandvik CS430 | 442.9667-00 | Hydroset cylinder cover |
| Sandvik CS430 | 442.9936-01 | Pinion shaft |
| Sandvik CS430 | 442.9962-00 | Pinion shaft housing assembled |
| Sandvik CS430 | 452.0632 | Head center |
| Sandvik CS430 | 452.0651-001 | Main shaft |
| Sandvik CS430 | 452.0945-901 | CONCAVE RING C, STEPPED 2 14MNCR CS440, MM1223001 |
| Sandvik CS430 | 452.0945-902 | CONCAVE RING C, STEPPED 2 18MNCR CS440, MM1328268 |
| Sandvik CS430 | 452.0945-903 | CONCAVE RING C, STEPPED 2 21MNCR CS440, MM1223002 |
| Sandvik CS430 | 452.1464-901 | Concave ring MC |
| Sandvik CS430 | 452.1465-901 | Concave MC |
| Sandvik CS430 | 452.4190-001 | Bottom Shell Bushing |
| Sandvik CS430 | 452.4516-001 | Eccentric bushing 16+20+25+30 |
| Sandvik CS430 | 452.6109-001 | Topshell |
| Sandvik CS430 | 452.6113-001 | Arm shield |
| Sandvik CS430 | 452.6117-901 | Mainshaft with headcenter |
| Sandvik CS430 | 452.6119-001 | Main shaft |
| Sandvik CS430 | 452.6121-001 | Head center |
| Sandvik CS430 | 452.6149-901 | Mainshaft assembly excl. mantle |
| Sandvik CS430 | 452.6185-901 | Topshell assembly excl. crushing chamber |
| Sandvik CS430 | 452.6913-001 | Top shell |
| Sandvik CS430 | 452.7002-901 | Lower concave,C |
| Sandvik CS430 | 452.9012 | Mantle,A |
| Sandvik CS430 | 452.9013 | Mantle,B |
| Sandvik CS430 | 452.9015 | Mantle,EC |
| Sandvik CS430 | 452.9016 | Mantle,C |
| Sandvik CS430 | 452.9019 | Upper concave |
| Sandvik CS430 | 452.9020 | Upper concave |
| Sandvik CS430 | 868.0805-00 | Consequência |
| Sandvik CS430 | 869.0189-00 | Bushing MGT No. 100 Di = 80 |
| Sandvik CS430 | 869.0221-00 | Di = 65,Bushing MGT No. 100 |
| Sandvik CS430 | 869.0327-00 | Bushing QD J80mm Di=80 |
| Sandvik CS430 | 869.0333-00 | M3-78 Di = 3⅞,Bushing QD M3 |
| Sandvik CS430 | 869.0338-00 | M3-38 Di = 3⅜,Bushing QD M3 |
| Sandvik CS430 | 869.0339-00 | M3-58 Di = 3⅝,Bushing QD M3 |
| Sandvik CS430 | 900.0134-00 | Bushing 3/8"×1/4X" |
| Sandvik CS430 | 900.1030-00 | Bushing RI-08-04 1/2"-1/4" |
| Sandvik CS430 | BG00133846 | Mantle,FlexiFeed B |
| Sandvik CS430 | BG00134054 | Mantle,FlexiFeed B |
| Sandvik CS430 | BG00134055 | Mantle,FlexiFeed B |
| Sandvik CS430 | BG00174592 | Lower concave,MC |
| Sandvik CS430 | BG00174593 | Lower concave,MC |
| Sandvik CS430 | BG00174594 | Lower concave,MC |
| Sandvik CS430 | BG00174595 | Lower concave,MC |
| Sandvik CS430 | BG00174596 | Lower concave,MC |
| Sandvik CS430 | BG00174597 | Lower concave,MC |
| Sandvik CS430 | BG00202524 | Mantle,FlexiFeed B |
| Sandvik CS430 | BG00213813 | Mainshaft sleeve |
| Sandvik CS430 | BG00358975 | Lower concave,MC |
| Sandvik CS430 | BG00360084 | Mainshaft and Mainshaft Sleeve |
| Sandvik CS430 | BG00395495 | Sandvik CS440 Top Shell without concave |
| Sandvik CS430 | BG00579404 | Pinion Shaft Housing Assembly |
| Sandvik CS430 | BG00174593 | Lower concave,MC |
| Sandvik CS430 | BG00174594 | Lower concave,MC |
| Sandvik CS430 | BG00174594 | Lower concave,MC |
| Sandvik CS430 | BG00174595 | Lower concave,MC |
| Sandvik CS430 | BG00174595 | Lower concave,MC |
| Sandvik CS430 | BG00174596 | Lower concave,MC |
| Sandvik CS430 | BG00174596 | Lower concave,MC |
| Sandvik CS430 | BG00174597 | Lower concave,MC |
| Sandvik CS430 | BG00174597 | Lower concave,MC |
| Sandvik CS430 | BG00202524 | Mantle,FlexiFeed B |
| Sandvik CS430 | BG00213813 | Mainshaft sleeve |
| Sandvik CS430 | BG00358975 | Lower concave,MC |
| Sandvik CS430 | BG00358975 | Lower concave,MC |
| Sandvik CS430 | BG00360084 | Mainshaft and Mainshaft Sleeve |
| Sandvik CS430 | BG00395495 | Sandvik CS440 Top Shell without concave |
| Sandvik CS430 | BG00579404 | Pinion Shaft Housing Assembly |
| Sandvik CS550 | Número da peça | Descrição |
| Sandvik CS550 | 452.6990-001 | Drive shaft |
| Sandvik CS550 | 452.7208-901 | Head nut with burning ring |
| Sandvik CS550 | 452.7275-001 | Eccentric wearing plate |
| Sandvik CS550 | 452.7276-001 | Bottom shell bushing |
| Sandvik CS550 | 452.7321-001 | Hydroset packing |
| Sandvik CS550 | 452.7443-001 | Inner head nut |
| Sandvik CS550 | 452.7467-001 | Burning ring,1 burning ring per manganese change when not changing head nut. When changing head nut you get a burning ring together with the head nut. |
| Sandvik CS550 | 452.7519-001 | Seal ring spider bushing,Per manganese change. |
| Sandvik CS550 | 452.7533-001 | Hydraulic manifold SAE 3000 2" |
| Sandvik CS550 | 452.7547-001 | Spider bushing assembly |
| Sandvik CS550 | 452.8265-901 | Transportation rack CH550/CS550 Main shaft |
| Sandvik CS550 | 452.8354-901 | Bottom shell assembly with steel plate liners (stan- dard) |
| Sandvik CS550 | 452.8354-902 | Bottom shell assembly with rubber liners (option) |
| Sandvik CS550 | 452.9000-001 | Mantle A M1,Alternative or order connected. |
| Sandvik CS550 | 452.9000-002 | Mantle CS550 A,M2 |
| Sandvik CS550 | 452.9000-003 | Mantle CS550 A,M7 |
| Sandvik CS550 | 452.9000-005 | Mantle CS550 A,M9 |
| Sandvik CS550 | 452.9001-001 | Mantle CS550 B,M1 |
| Sandvik CS550 | 452.9001-002 | Mantle CS550 B,M2 |
| Sandvik CS550 | 452.9001-003 | Mantle CS550 B,M7 |
| Sandvik CS550 | 452.9001-005 | Mantle CS550 B,M9 |
| Sandvik CS550 | 452.9002-001 | Mantle CS550 S,M1 |
| Sandvik CS550 | 452.9002-002 | Mantle CS550 S,M2 |
| Sandvik CS550 | 452.9002-003 | Mantle CS550 S,M7 |
| Sandvik CS550 | 452.9002-005 | Mantle CS550 S,M9 |
| Sandvik CS550 | 452.9004-001 | First lower Concave EC M1,Alternative or order connected. |
| Sandvik CS550 | 452.9004-002 | First Lower Concave CS550 EC,M2 |
| Sandvik CS550 | 452.9004-003 | First Lower Concave CS550 EC,M7 |
| Sandvik CS550 | 452.9004-005 | First Lower Concave CS550 EC,M9 |
| Sandvik CS550 | 452.9005-001 | First Lower Concave CS550 C,M1 |
| Sandvik CS550 | 452.9005-002 | First Lower Concave CS550 C,M2 |
| Sandvik CS550 | 452.9005-003 | First Lower Concave CS550 C,M7 |
| Sandvik CS550 | 452.9005-005 | First Lower Concave CS550 C,M9 |
| Sandvik CS550 | 452.9006-001 | Second Lower Concave CS550 EC,M1 |
| Sandvik CS550 | 452.9006-002 | Second Lower Concave CS550 EC,M2 |
| Sandvik CS550 | 452.9006-003 | Second Lower Concave CS550 EC,M7 |
| Sandvik CS550 | 452.9006-005 | Second Lower Concave CS550 EC,M9 |
| Sandvik CS550 | 452.9007-001 | Second Lower Concave CS550 C,M1 |
| Sandvik CS550 | 452.9007-002 | Second Lower Concave CS550 C,M2 |
| Sandvik CS550 | 452.9007-003 | Second Lower Concave CS550 C,M7 |
| Sandvik CS550 | 452.9007-005 | Second Lower Concave CS550 C,M9 |
| Sandvik CS550 | 452.9008-002 | Upper Concave CS550 EC,M2 |
| Sandvik CS550 | 452.9008-003 | Upper Concave CS550 EC,M7 |
| Sandvik CS550 | 452.9008-005 | Upper Concave CS550 EC,M9 |
| Sandvik CS550 | 452.9010-001 | Upper Concave CS550 C,M1 |
| Sandvik CS550 | 452.9010-002 | Upper Concave CS550 C,M2 |
| Sandvik CS550 | 452.9010-003 | Upper Concave CS550 C,M7 |
| Sandvik CS550 | 452.9010-005 | Upper Concave CS550 C,M9 |
| Sandvik CS550 | 869.0235-00 | Bushing MGT NR 125 Di 100 |
| Sandvik CS550 | 869.0286-00 | Bushing MGT NR 125 Di 110 |
| Sandvik CS550 | 873.0615-00 | O-ring 24.99x3.53 SMS 1587,For over-pressure sealing between dust collar and bottom shell. |
| Sandvik CS550 | 891.2850-901 | Rubber lining bottom shell assembly |
| Sandvik CS550 | 899.0508-00 | Eye Bolt VRS-F-M12 Swivel,Spider bushing Hydroset piston Dust seal ring |
| Sandvik CS550 | 899.0509-00 | Eye Bolt VRS-F-M16 Swivel,Spider cap Crusher pulley Pinion,Pinion shaft Eccentric Counter Weight Hub and gear Dust collar Feed hopper |
| Sandvik CS550 | 899.0512-00 | Eye Bolt VRS-F-M8 Swivel,Bottomshell bushing Eccentric wearing plate Eccentric bushing Mainshaft sleeve |
| Sandvik CS550 | 899.0523-00 | Eye Bolt VRS-F-M36,Mainshaft |
| Sandvik CS550 | 900.0155-00 | Bushing N4 Zn DN40/25 zinced |
| Sandvik CS550 | BG00174603 | Steel plate lining bottom shell assembly |
| Sandvik CS550 | BG00208723 | Cover plate Shaft protection |
| Sandvik CS550 | BG00215156 | Step bearing set CH550/CS550,Includes the following |
| Sandvik CS550 | BG00227709 | Lifting tool. eccentric bushing |
| Sandvik CS550 | BG00227710 | Lifting tool. bottom shell bushing |
| Sandvik CS550 | BG00227711 | Lifting tool, extractor for step bearing |
| Sandvik CS550 | BG00362732 | Hydralic pump, Mainshaft, with mounting oil |
| Sandvik CS550 | BG00418248 | Filler ring assembly CS550,For concave C |
| Sandvik CS550 | BG00428222 | Hydroset relief valve alternatives |
| Sandvik CS550 | BG00462596 | Mainshaft sleeve cover |
| Sandvik CS550 | BG00475833 | Main shaft sleeve |
| Sandvik CS550 | BG00483239 | Transport rack, top shell CS550 |
| Sandvik CS550 | BG00484613 | Pinion shaft housing, machined |
| Sandvik CS550 | BG00510051 | Main shaft cover CH550/CS550 |
| Sandvik CS550 | BG00573455 | Main shaft assembly excluding mantle |
| Sandvik CS550 | BG00573468 | Main shaft assembly including mantle |
| Sandvik CS550 | BG00575310 | Spider assembly including liners, bushing |
| Sandvik CS550 | BG00575563 | Top shell assembly excluding concave |
| Sandvik CS550 | BG00575599 | Top shell assembly including concave |
| Sandvik CS550 | BG00575763 | Fastener kit for lower concave |
| Sandvik CS550 | BG00575962 | Fastener kit for upper concave |
| Sandvik CS550 | BG00579275 | Pinion shaft housing assembly |
| Sandvik CS550 | BG00579374 | Pinion shaft housing repair kit |
| Sandvik CS550 | BG00580145-01 | Eccentric bushing 24 + 28 + 32,Alternative or order connected. |
| Sandvik CS550 | BG00580145-02 | Eccentric bushing CS550 throw 40/36/32 |
| Sandvik CS550 | BG00580145-03 | Eccentric bushing CS550 throw 48/44/40 |
| Sandvik CS550 | BG00802485 | Shim 8 mm Concave extractor P1 |
| Sandvik CS550 | BG00802507 | Shim 5 mm Concave extractor P1 |
| Sandvik CS550 | BG00806500 | Sealing ring assembly CS550,For concave EC |
| Sandvik CS660 | Número da peça | Descrição |
| Sandvik CS660 | 442.8735-01 | Bottom shell |
| Sandvik CS660 | 442.8760-00 | Liner-pin shaft arm |
| Sandvik CS660 | 442.8742-01 | Bottom shell bushing |
| Sandvik CS660 | 442.9039-00 | Liners in bottom shell |
| Sandvik CS660 | 442.8741-01 | Dust collar |
| Sandvik CS660 | 442.8973-01 | Excêntrico |
| Sandvik CS660 | 442.9033-01 | Eccentric bushing |
| Sandvik CS660 | 442.8729-01 | Hub |
| Sandvik CS660 | 442.8723-00 | Gear and pinion set |
| Sandvik CS660 | 442.8761-01 | Ecc. wearing plate |
| Sandvik CS660 | 442.8724-01 | Hydroset cyl. bushing |
| Sandvik CS660 | 442.8730-01 | Piston wearing plate |
| Sandvik CS660 | 442.8739-00 | Chevron packing |
| Sandvik CS660 | 442.8726-01 | Hydroset cyl. cover |
| Sandvik CS660 | 442.8847-00 | Pinion shaft housing ass |
| Sandvik CS660 | 442.8764-01 | Pinion shaft housing |
| Sandvik CS660 | 442.8723-02 | Pinhão |
| Sandvik CS660 | 868.0806-00 | Consequência |
| Sandvik CS660 | 442.8772-01 | Pinion shaft |
| Sandvik CS660 | 452.1640-901 | Main shaft - Head centre |
| Sandvik CS660 | 442.8792-01 | Main shaft sleeve |
| Sandvik CS660 | 442.8732-01 | Main shaft step |
| Sandvik CS660 | 442.8982-01 | Mantle A |
| Sandvik CS660 | 442.8983-01 | Mantle B |
| Sandvik CS660 | 442.8800-00 | Head nut with burn ring |
| Sandvik CS660 | 442.8791-01 | Inner head nut |
| Sandvik CS660 | 442.8801-01 | Retaining ring |
| Sandvik CS660 | 442.9076-00 | Top shell asm. excl. concave ring |
| Sandvik CS660 | 442.8970-01 | Top shell |
| Sandvik CS660 | 442.8976-01 | Arm shield |
| Sandvik CS660 | 900.1030-00 | Bushing RI-08-04 1/2”-1/4” |
| Sandvik CS660 | 442.8754-01 | Spider bushing |
| Sandvik CS660 | 442.8979-00 | Concave ring |
| Sandvik CS660 | 442.9071-00 | Concave ring C, lower |
| Sandvik CS660 | 442.8981-00 | Concave ring EC, upper |
| Sandvik CS660 | 442.9072-00 | Concave ring C, upper |
| Sandvik CS660 | 442.8759-01 | Liner-Narrow arm |
| Sandvik CS660 | 442.6908-01 | Casquilho |
| Sandvik CS660 | 879.0521-00 | V-belt pulley 630 MGT 125 12xSPC |
| Sandvik CS660 | 869.0286-00 | Bushing MTG no 125 Ø110 |
| Sandvik CS660 | 869.0330.00 | Bushing QD n110mm Ø110 |
| Sandvik CS660 | BG00564555 | Sandvik CS660 Main Shaft Assembly Excluding Mantle |
| Sandvik CS660 | 452.4151-001 | Dust collar |
| Sandvik CS660 | 452.5839-001 | Support ring |
| Sandvik CS660 | 452.4125-901 | Bottomshell assembly |
| Sandvik CS660 | 452.5920-902 | Concave Lower EC |
| Sandvik CS660 | 442.8982-02 | Mantle A |
| Sandvik CS660 | 452.9040-902 | Upper concave, MC |
| Sandvik CS660 | 452.9041-902 | First lower concave, MC |
| Sandvik CS660 | 442.8790-00 | Main shaft position sensor |
| Sandvik CS660 | 923.0095-00 | Thermostat |
| Sandvik CS660 | 442.4224-901 | Upper shell assembly |
| Sandvik CS660 | BG00565120 | Mainshaft assembly include mantle |
| Sandvik CS660 | 452.3822-902 | Concave Lower C Mn18 |
*Observação: Os nomes dos fabricantes, números de peças, números de modelos, imagens e descrições são empregados apenas para fins de referência e identificação. Esses elementos são propriedade intelectual dos respectivos fabricantes de máquinas. Todas as peças fornecidas pela Stellar Heavy são fabricadas e garantidas pela própria Stellar Heavy, independentemente do Fabricante de Equipamento Original (OEM). É importante observar que a Stellar Heavy não tem nenhuma afiliação com o OEM e não pretende criar nenhuma impressão de tal associação.
Portuguese 
English 
Russian 
Spanish 
German 
Kazakh 
Arabic 
Turkish 
Indonesian 
Thai